EBR
EBR side extractor was developed for the extraction and discharge of waste material from silo. It’s made of metal construction, leaf springs and helical shafts driven by a gear motor. The leaf springs loosen the material in the silo, and the helical shaft transports the material to a rotary extractor that removes the material from the silo.
The silos extractor is a system that allows the extraction of wood chips from a storage silo. It consists of leaf springs to move the sawdust, a horizontal screw fixed to the floor of the silo and a rotary valve that continuously discharges the material outside the storage volume at the desired point.
The extractor with leaf spring allows wood shavings, sawdust, etc. to be extracted from the storage silos or cement pits. It is fitted centrally on the base of the steel silos, with a high holding capacity and diameter or in circular or square cement pits.
The extractor with leaf spring is available in different sizes and is built in robust steel structure of a suitable thickness. It is equipped with a gear motor to adjust the leaf spring speed.
Inside the extractor or directly below, there is a screw conveyor for the transfer of the material.
BENEFITS:
- Low maintenance costs;
- Durability and efficiency;
- Constructed with multiple discharge outlets.
Basic data | EBR 2500 | EBR 3000 | EBR 4000 | EBR 4500 | EBR 5000 |
---|---|---|---|---|---|
Length [mm] | 2500 | 3000 | 4000 | 4500 | 5000 |